Owners manual

BX3782

2001-05 Toyota RAV4

Installation Instructions

405-0030 Page 4 of 9 10/9/08

3. Extract four Phillips head push pins from top of

grille trim. Notice clips on grille trim just under

head light assembly. Set push pins aside to

be reinstalled later.

3 4

4. Carefully pry apart grille trim with at screw

driver making sure not to scratch paint and the

clips are not damaged.

6. Underneath bumper fascia, remove seven hex

bolts with 10MM socket, unplug blinker and

fog lights, and pull bumper fascia forward. Set

bolts and bumper aside to be reinstalled later.

5. Use 10MM socket to remove hex bolt and

then a Phillips screw from inside of front wheel

shroud, both sides. Set bolts and screws

aside to be reinstalled later.

