Owners manual

© 2006, 07, 09, 10, 11 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: [phone] • Fax: [phone]
www.blueox.com
CUSTOMER SERVICE COMMITMENT
Blue Ox is committed to providing you with
exceptional customer care throughout your lifetime
with our products. Our team is here to assist you
with any questions you may have regarding the
performance of your product. Simply call (402)
385-3051 and you can speak with our customer
care team.
Additionally, please visit our website to see
which rallies our Destination America team will
be attending. For a nominal fee, our service
technician will service your towing system to
ensure it’s in proper working condition. Also as
a commitment to our customers, should you visit
our factory you can stay at our full service Blue
Ox campground at no charge along with enjoying
a factory tour.
Again thank you for being our customer and for
the condence you have shown in the performance
of our products. It is because of customers like
you we enjoy the success we have today.
Page 9 of 9 292-2862 Rev. H 8/24/12
Page 8 of 9 292-2862 Rev. H 8/24/12
20. With the fascia on a hard, at surface, use the
hack saw blade to remove the second rib in
from the outside edge of the grille style.
20

Shown without removable tabs installed.
Shown with removable tabs installed.
DEALER or INSTALLER:
Be certain the user receives the
instruction sheets for their products.
21. Reinstall the fascia support molding and
styrofoam, horns, belly pan, radiator cover,
fascia, bolts, screws and pushpins.
Install the tow bar and safety cables
according to the instructions provided in their
packages. When demonstrating this to the
customer, be sure to include all the contents
and packages.
Do NOT substitute other devices if the tow
bar pins and clips are misplaced.
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE Installing the fascia.
22
22. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate (see grey arrow). The photo
above shows the recommended installation
of the cables to frame of vehicle (see white
arrow). Additional options may interfere with
suggested mounting; in this case secure
the cables to a solid piece of the frame as
described in the instructions included with the
permanent baseplate safety cables. Be sure
the safety cables do not rub against any hoses
or moving parts. Do this to both sides of the
vehicle.


19
19. When reinstalling the washer reservoir, use
three 1/4” at washers for the lower bolt -
between the frame and the reservoir.

If the baseplate is in an accident, it must
be replaced. DO NOT use it again! An
accident can cause unseen damage and
using it again could result in more dam-
age or serious injury. DO NOT use the
baseplate if it is damaged or missing parts.
2006-10 Toyota RAV4 & 2011-13
RAV4 Sport
BX3770
2006-10 Toyota RAV4 & 2011-13
RAV4 Sport
BX3770