Owners manual

10. Align the electrical bracket with the center of baseplate cross tube, install the self tapping
screws into the bottom of cross tube with the 5/16" nut driver and drill. Reposition tabs to
their original placement and reinstall push pins.
11. Attach the permanent baseplate safety cables to the provided convenience link on the
baseplate. The photo above shows the recommended installation of the cables to frame of
vehicle. Additional options may interfere with suggested mounting; in this case, secure the
cables to a solid piece of the frame as described in the instructions included with the
permanent baseplate safety cables. Be sure the safety cables do not rub against any hoses
or moving parts. Do this on both sides of the vehicle. NOTE: You will have to square off the
belly pan slightly prior to reinstalling it.
12. Dealer or installer be certain the user receives the instruction sheet.
BX3763
2005-2013 Toyota Tacoma
(Includes Prerunner)
Installation Instructions
292-2737 Rev. J Page 9 of 10 1/8/12