Owners manual

8. Align endplate with drilled holes and insert bolts and lock washers. Be sure to use Loctite®

Red on all bolts prior to tightening. Replace wheel well liner to the original position and

reinstall the two (2) push pins.

9. Remove the cap on BOTH sides of the vehicle and insert item #2, 3/8"-16 Nut Plate

Weldment. Replace cap.

BX3763

2005-2013 Toyota Tacoma

(Includes Prerunner)

Installation Instructions

292-2737 Rev. J Page 8 of 10 1/8/12