Owners manual

4. Remove the two (2) push pins from the bottom edge of the front fascia. After removing
the push pins, use a rubber mallet to bend the tabs upward where the push pins were
located.
5. Insert the 7/8" O.D. spacer tube (item #9) into the opening in the side of the lower extension
below the frame end so it is ush.
BX3763
2005-2013 Toyota Tacoma
(Includes Prerunner)
Installation Instructions
292-2737 Rev. J Page 6 of 10 1/8/12
DS
PS
DS
PS