Owners manual

1. Using a 12MM socket remove the four (4) bolts, two (2) per side, from the belly pan

and set aside for reinstalling after baseplate installation. NOTE: Some models may

not have a belly pan.

2. On 2011-2012 models only, locate the frame extension, remove the bolt using a

12MM socket and slide outer tube out. The outer tubes will not be reinstalled.

3. Locate the frame extension, with a reciprocating saw remove the end portion of the

cross member slightly so it is ush with the tab. Be sure to paint edges with a high

quality paint in order to prevent rusting.

BX3763

2005-2013 Toyota Tacoma

(Includes Prerunner)

Installation Instructions

292-2737 Rev. J Page 5 of 10 1/8/12

PS DS