Owners manual

© 2003, 08, 11 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial
Park • Pender, Nebraska 68047 • Phone [phone] • Fax [phone] • www.blueox.com
TM
Page 1 of 4 292-2559 Rev. C 5/10/11
BX3754 Installation Instructions
2004 Toyota Scion XA
Serial No.
The headlight assembly, front fascia, horn bracket and windshield washer reservoir are
removed for baseplate installation. Drilling is required. Trimming of air dam on metal bumper is required.
The BX8869 is available for the vehicle. Attachment Tabs are 20 1/2 inches center to center and a height
of 13 3/4 inches.
3. Just forward of front tire are two metric
bolts, remove lower bolt with the 10MM
socket, both sides.
4. Forward of front tires, on lower fascia's
tabs, are eight metric bolts to remove with
the 10MM socket.
5. Using the 12MM socket, remove four
metric nuts from metal bumper, pull metal
bumper forward and set aside.
1. Remove the four push pins from the top edge
of front grill.
2. Remove two metric bolts from top edge of
fascia's tabs with the 10MM socket. Remove
one push pin.
6. Remove two metric bolts from bumper
bracket, both sides, pull forward and
set aside.










