Owners manual

BX3616
2009-12 Subaru Forester
Installation Instructions
405-0010 Rev. E Page 7 of 8 3/13/12
19. Attach the breakaway to the bracket with a
1/4-20 x 3/4” hex bolt and 1/4-20 hex nut.

19
18


18. Attach the breakaway bracket to the under
side of the bumper on the passenger side with
two 10-16 x 1” self drilling screws.
20. On the back side of the fascia, trim the corners
straight across as needed. Do this on both
sides. Reinstall the fascia.

20

17

17. Reinstall the bumper with existing bolts. Two
5/16” at washers will be needed on the
bottom.
Install the tow bar and safety cables
according to the instructions provided in their
packages. When demonstrating this to the
customer, be sure to include all the contents
and packages.
Do NOT substitute other devices if the tow
bar pins and clips are misplaced.
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.