Owners manual


TM
© 2007 Blue Ox Division, Automatic Equipment Mfg. Co. • One Mill Road, Industrial Park
Pender, Nebraska 68047 • Phone [phone] • Fax [phone] • www.blueox.us
Page 2 of 5 292-2636 8/5/08
9. Remove metric bolt from front of head light
assembly with the 10MM socket, both sides.
10. Remove two metric bolts from headlight
assembly next to radiator, both sides, pull
assemblies forward, unplug and set aside.
11. Remove four metric bolts from both
sides of metal bumper, pull forward and
set aside.
7. Using the 10MM socket, remove metric bolt
from head light assembly and one push pin,
both sides.
8. Remove metric bolt from lower side of head
light assembly using the 10MM socket, both
sides.
12. Using the utility knife mark and cut
lower air dam from both sides. This
will allow open area for baseplate
installation.
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô