Owners manual

1. Using a fl at screwdriver, remove 4 push pins
from the fl at plastic piece on top. Do this to
both sides of the vehicle. Set push pins aside
to be reinstalled later.
Attachment Tabs:
Due to the design of the removable tabs, the
RangeFinder II and Ambassador tow bars can
not be used. Adapters, except the BX8833 and
BX88151, can be used with this baseplate.
Installation Notes: The fascia is
removed and reinstalled during installation of
the baseplate. Drilling is required. Trimming
of the fascia is required.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
2007-10 Saturn Outlook
Installation Instructions
BX3330
Installation Instructions:
Page 3 of 7 292-2932 Rev. D 5/27/11








1A
1A
1B
1B
Possible Location for the BX8869
Possible Location for the BX8869
Bulb and Socket Wiring Kit.
Bulb and Socket Wiring Kit.


Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.