Owners manual

BX3329
2007-09 Saturn Aura
Installation Instructions
292-2898 Page 9 of 10 10/2/08
23. On the driver’s side, just behind air dam
tab, cut down 3”. Then, cut horizontally
toward rear of air dam approximately 2”. Cut
upwards to the top, following the contour of
the air dam.
23 24
25
24. On the driver’s side, approximately 1” from
the top of the air dam, cut horizontally from
the front of the air dam to the back.
26
26. Attach the permanent baseplate safety cables
to the provided convenience link on the
baseplate (see grey arrow). The photo above
shows the recommended installation of the
permanent baseplate safety cables to frame
of the vehicle (see white arrow). If the vehicle
has additional options, not shown above,
which interfere with mounting the permanent
baseplate safety cables, secure the cable
to a solid piece of the vehicle’s frame as
described in the instructions included with the
permanent baseplate safety cables.
25. Align the fascia to its original position and,
using the hack saw blade, trim necessary
openings in the grille style for the attachment
tabs. Do this to both sides of the vehicle.





