Owners manual

BX3329
2007-09 Saturn Aura
Installation Instructions
292-2898 Page 7 of 10 10/2/08
15. On the driver’s side, align the upper back
hole of the baseplate with the existing horn
bracket hole and clamp in place with the vise
grips. Using the baseplate as a template, drill
the three (3) remaining holes into the frame
using the 13/32” drill bit.
15
17
16. Install 3/8”-16 x 1-1/4” hex bolts with 3/8” lock
washers and 3/8”-16 hex nuts to lower two (2)
holes.
18. On the passenger’s side, align the upper front
baseplate hole with the existing air bafe hole
and clamp in place with the vise grips. Using
the baseplate as a template, drill four (4)
holes into the frame using the 13/32” drill bit.
17. On the driver’s side, insert 3/8” nut plate
through opening in the bottom of the frame
rail and align to the upper front hole (see
white arrow). Install 3/8”-16 x 1-1/4” hex bolt
with 3/8” lock washers and tighten to nut
plate. Reinstall horn bracket to upper back
hole using 6MM hex bolt, 1/4” lock washer
and 1/4” at washer (see grey arrow). Trim
excess nut plate wire.
16
18





