Owners manual

BX3329
2007-09 Saturn Aura
Installation Instructions
292-2898 Page 6 of 10 10/2/08


11. Remove one (1) pushpin from the air dam
and one (1) from the bottom of metal bumper
(see white arrows). Remove one (1) pushpin
from top of metal bumper (see grey arrow).
Pull air dam forward to remove. Do this to
both sides of the vehicle. Set pushpins and
air dams aside to be reinstalled later.
11 12
13
12. Lay fascia face down on a smooth, at
surface. Press in to release clip on the side
of fascia support (see white arrow). Do this
to both sides of fascia support. Press back to
release clip on center of fascia support (see
grey arrow). Pull fascia support to remove.
14
14. Using the utility knife, remove the tab from
the back corner of the fascia. Do this to both
sides of vehicle.
13. After removing fascia support, use the utility
knife to remove the clip on both corners of
fascia support.




