Owners manual

19. Remove horn bracket’s existing metric bolt
on the driver’s side from baseplate (installed
in step 15). Reinstall horn bracket using the
6MM-1 x 30MM, 6MM lock washer and 1/4”
fl at washer.
19
19
2005-08 Pontiac Solstice G6 GT
Installation Instructions
BX3231
21. The dimensional variations between otherwise
identical cars can be considerable. While the
baseplate was designed for easy installation,
it may be necessary to tailor the baseplate
slightly to compensate for auto manufacturers’
tolerances. These minor adjustments may
include fi ling a hole slightly, bending electrical
rods, adding shims and/ or bending endplates.
22. Install the tow bar and safety cables according
to the instructions included in their packages.
23. Do not substitute other devices if the tow bar
pin and clip are lost.
24. DEALER OR INSTALLER: BE CERTAIN
THE USER RECEIVES THE INSTRUCTION
SHEET.
Page 8 of 9 292-2663 Rev. C 8/7/09
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.
20. Hold fascia as close to its original position
as possible on the vehicle, mark and cut
horizontal rib to allow receivers to come
through fascia.