Owners manual

Vehicle Weight:
Due to the design of the removable tabs, the
RangeFinderII, Adventurer and Ambassador
tow bars can not be used. Adapters, except the
BX8833 and BX88151, can not be used with this
baseplate.
Installation Notes: The front fascia,
horn bracket and air baffl e are removed for
baseplate installation. Drilling is required.
Trimming of air dam and fascia is required.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods and/ or bending end
plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
2005-08 Pontiac Solstice G6 GT
Installation Instructions
BX3231
Installation Instructions:
Page 3 of 9 292-2663 Rev. C 8/7/09
1
1




2. Remove two christmas tree push pins and one
metric bolt from the edge of wheel well, just
forward of front tire with the 7MM socket, both
sides.






2
2


1. Remove the six push pins from the top edge of
fascia just between headlight assemblies.