Owners manual

BX2646
2013-14 Ford Fusion SE & Titanium Hybrid w/Adaptive Cruise
Installation Instructions
405-0346 Rev A Page 5 of 7 9/27/13
5. Using a utility knife, trim the outer
ange of the washer uid reservoir back
approximately 2-1/4”as shown.
6. Using a utility knife, trim two (2) pockets
in the plastic shrouding back ush to the
metal brackets as shown.
8. Using a 1-1/4” hole saw, drill an access
hole on the passenger side (left) and
driver side (right) as shown for nut plate
access.
Note: On the passenger side keep the
access hole as high up on the angled part
of the frame to avoid the front hole of the
baseplate.





2-1/4”
7. Trim the radiator shrouding approximately
as shown for baseplate clearance. Do this
on three (3) shrouds across the front of
the vehicle.