Owners manual

BX2646
2013-14 Ford Fusion SE & Titanium Hybrid w/Adaptive Cruise
Installation Instructions
405-0346 Rev A Page 4 of 7 9/27/13
1. Using a T25 Torx, remove the three (3)
screws from the top edge of the fascia
(white). Remove the six (6) push pins from
the top edge of the fascia (gray).
2. Remove the three (3) push pins from the
outer edge of the wheel well. Do this on
both sides of the vehicle.
3. Using a 7MM socket, remove the ve (5)
screws from the underside edge of the
fascia (gray). Remove the push pins from
the underside corners, there are two (2)
on each side (white).
 







  










4. Pull the corners of the fascia out and away
from the vehicle. Disconnect all electrical
connections from the back side of the
fascia. Remove the fascia from the vehicle
and set aside.