Owners manual

BX2643
2010 & 2013-14 Ford Taurus SHO w/ Adaptive Cruise Control
Installation Instructions
405-0328 Rev A Page 6 of 7 9/16/13
9. Mark and trim the front tab of the washer
uid reservoir (gray). Reinstall the
reservoir, using the supplied 1/4” washers
as a spacer on the top rear hole (white).
10. On the backside of the fascia, mark and
trim the fascia as shown. Do this on both
sides of the fascia.
11. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate. The photo above shows the
recommended installation of the cables to
frame of vehicle. Additional options may
interfere with suggested mounting; in this
case, secure the cables to a solid piece of
the frame as described in the instructions
included with the permanent baseplate safety
cables. Be sure the safety cables do not rub
against any hoses or moving parts. Do this
on BOTH sides of the vehicle.
12. Hold the fascia up as close to its original
position as possible. Mark and trim around
the attachment tabs and convenience
links. Reinstall the fascia.



