Owners manual

BX2639
2013 Ford C-Max Hybrid SEL w/ Fog Lights
Installation Instructions
292-0773 Rev A Page 7 of 8 11/21/12
12. On the passenger side, reinstall the
washer uid reservoir. Reuse one (1) of
the existing screws on left side (white).
Then a 3/8”-16 x 1” bolt, 3/8” at washer
and 3/8” lock nut on the right side (black).


14. On the passenger side, reinstall the horn
assembly to the vehicle. Use one of the existing
holes on the frame below the baseplate with a
1/4”-20 x 3/4” bolt and 1/4” nylon nut.
Attach the permanent baseplate safety
cables to the provided convenience link on the
baseplate. The photo shows the recommended
installation of the cables to frame of vehicle.
Additional options may interfere with suggested
mounting; in this case, secure the cables to
a solid piece of the frame as described in
the instructions included with the permanent
baseplate safety cables. Be sure the safety
cables do not rub against any hoses or moving
parts. Do this on BOTH sides of the vehicle.
13. On the driver side, install the attachment
plate to the existing tab, using the existing
bolt (white). Bend the tab back to it’s
original position, then connect the air box
to the attachment plate with a 1/4”-20 x
3/4” bolt and 1/4” nylon nut (gray). Secure
any loose wiring.


