Owners manual

BX2639
2013 Ford C-Max Hybrid SEL w/ Fog Lights
Installation Instructions
292-0773 Rev A Page 5 of 8 11/21/12
5. Unplug and cap the washer uid lines and
disconnect pump wire. Using a 10MM
socket, remove the two (2) screws and
set reservoir aside.
6. Using a 10MM socket, remove the screw
from the backside of the horn bracket and
set the horn assembly aside.
7. On the driver’s side of vehicle, using a
8MM socket, remove the screw from the
air box. Then bend the metal tab away
from the vehicle for baseplate clearance
(white). Also remove the wire loom from
the frame and push aside (gray).
8. On the driver’s side of the bumper, using
a 1-1/4” hole saw, drill a hole thru the
bumper as shown above. This hole will be
used for access to the baseplate bolts.
 



