Owners manual

BX2639
2013 Ford C-Max Hybrid SEL w/ Fog Lights
Installation Instructions
292-0773 Rev A Page 4 of 8 11/21/12
1. Using a at screwdriver, remove the two
(2) pushpins from the top back edge
of the fascia. Do this on both sides of
vehicle.
2. Using a T27 Torx, remove the one (1)
inner screw behind the headlight from
the fascia. Do this on both sides of the
vehicle.
3. Using a T27 Torx, remove the two (2)
screws from the inner edge of the wheel
well. Above the screws where the fascia
meets the fender remove the pushpin with
a at screwdriver. Do this on both sides of
the vehicle.






4. On the underside of the fascia, using
a at screwdriver, remove the two (2)
pushpins from the center (4A). Then
remove the four (4) remaining pushpins,
two (2) on either side of the center
pushpins (4B). Remove the fascia from
the vehicle.
4A
4B



