Owners manual

BX2625
2011-13 Lincoln MKX (Limited Edition)
With Speed Control System
Installation Instructions
405-0150 Rev. E Page 7 of 9 1/26/12
16

15
15. Remove coolant line brackets on the back side and relocate to the front of the coolant line. Using the bracket as
a template, with a 1/4” drill bit drill into lower cross member and install 1/4-20 x 3/4” hex bolt and whiz nut on the
back side of the cross member. Do this to both sides.
16. Reinstall the bolt located on the side of the vehicle for the lower coolant line.
 
17. OPTIONAL: Install breakaway bracket and breakaway on the driver’s side of the vehicle between the
quicklinks and electrical rods. Drill 1/4” hole into the frame located below the radiator. Attach bracket to
frame of vehicle with 1/4-20 x 3/4 hex bolt and 1/4-20 hex nyl nut. Attach breakaway to bracket with 1/4-20 x
3/4 hex bolt and 1/4-20 hex ange whiz locking nut.