Owners manual

BX2617
2009-12 Lincoln MKS
2010-12 Lincoln MKT
Installation Instructions
405-0100 Rev. I Page 7 of 11 3/12/12
4. On the driver’s side, using an 8MM socket, remove the bolt holding the horn. Set the horn and
bolt down by the side to be reinstalled later.
5. MKS models: On the passenger side, using an 8MM socket remove the bolt from the top right
side (gray arrow). Using an 11MM socket, remove the two bolts on the left side (white arrows).
Unhook hoses and wires. Set washer reservoir and bolts aside to be reinstalled later.
MKT models: Use a 10MM socket to remove all three bolts.
4
5
5
6
6. MKS models: On the passenger side, trim
across the groove and down.
6
6. MKT models: On the passenger side, trim 2 1/4” up and 4 1/2” across.
6