Owners manual

BX2617
2009-12 Lincoln MKS
2010-12 Lincoln MKT
Installation Instructions
405-0100 Rev. I Page 4 of 11 3/12/12
Removable Tabs: Motorhome mount tow bars are recommended for use with this baseplate. Due
to the design of the removable tabs, the RangeFinderII, Adventurer, and Ambassador tow bars can
not be used. The Acclaim tow bar may be used, but will not fold and store on the front of the vehicle.
Adapters, except the BX8833 and BX88151, can not be used with this baseplate.
Instruction Notes: The fascia, horn, washer reservoir and plastic cover are removed and reinstalled
for the baseplate installation. Some drilling and trimming is required.
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances. These minor adjustments may include ling a hole
slightly, bending electrical rods or bending end plates.
The BX8848 4-Diode Wiring Kit is recommended for this vehicle.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• Be sure that ALL electrical connections are plugged in properly and functioning before
installing the fascia.
• Do not use the towed vehicle for storing luggage, equipment, etc. This may cause you to
exceed the towing capacity of the tow bar, baseplate, and its accessories.
• Be sure to use Loctite
®
red on all bolts before tightening. Tighten all bolts according to the
torque chart provided.