Owners manual

BX2410
2013 Dodge Dart SXT
Installation Instructions
405-0347 Rev A Page 4 of 7 1/28/14
1. Remove the four (4) push pins (white).
Using a 10MM socket, remove the one
(1) screw (gray). Do this on both sides of
vehicle. Remove the top cover and set
aside.
2. On top side of fascia, remove the four (4)
push pins (white). Using a 10MM socket,
remove the two (2) screws (gray). Do this
on both sides of vehicle.
3. Using a 10MM socket, remove the one (1)
upper screw from wheel well (inset). Using
a 8MM socket remove the lower three (3)
screws from wheel well (white). Do this on
both sides of vehicle.
4. Using a 8MM socket remove the eight (8)
screws from underneath the fascia.






















