Owners manual

BX2410
2013 Dodge Dart SXT
Installation Instructions
405-0347 Rev A Page 3 of 7 1/28/14
Item No. Part No. Description Qty.
1.................................61-7234 .............................BX2410 Baseplate ...........................................................1
2.................................62-3469 .............................Attachment Tab Assembly with Hole ...............................2
3.................................101-5822 ...........................4 Way Connector Adapter ...............................................2
4.................................201-0192 ...........................#10-32 x 1/2” Round Slotted Head Screw ....................... 2
5.................................201-0553 ...........................1/4”-20 x 1/2” Hex Wshd Bolt Type F TCS, ZP ................2
6.................................202-0047 ...........................#10-32 Hex Nut ...............................................................2
7.................................203-0054 ...........................#10 Lock Washer, ZP ......................................................2
8.................................Existing ..............................Bumper Bolts ................................................................... 6
9.................................226-0046(not shown) ........Class III Safety Cables ....................................................2
10...............................229-0359(not shown) ........3/8” Quicklink, ZP ............................................................4
11 ............................... 290-0437(not shown) ........Black Cap Plug Receiver .................................................2
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or in need of
replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade
5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/
or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized
vehicle will void the warranty.
Tools Required
Large Vise Grip
Flat Screwdriver
Utility Knife
Torque Wrench
Drill
Tape Measure
Loctite
®
RED
8MM Socket
10MM Socket
15MM Socket
4 PIN CONNECTOR
2
7
8
6 PIN CONNECTOR
6
3
5
1
4