Owners manual

BX2407
2012-14 Dodge Challenger
Installation Instructions
405-0313 Rev A Page 4 of 9 9/3/13
1. Lift up and remove the plastic radiator
covers from both the passenger and driver
side of the vehicle.
3. Remove the ve (5) pushpins from the
wheel well. Four (4) from the outer edge
and one (1) on the inner bottom edge. Do
this on both sides of the vehicle.
4. Using a 10MM socket, remove the screw
from behind the wheel well cover at the
top edge of the fascia. Do this on both
sides of the vehicle.
2. Remove the six (6) push pins from the
top side of the fascia. Three (3) push pins
from both sides of the vehicle.

 






