Owners manual

BX2334

2012 Hyundai Veloster

Installation Instructions

405-0235 Page 5 of 9 1/11/12

4. Pull the side of the fascia slightly downward away from the headlights. Lift the side upward

and gently away from the vehicle. Place the front fascia to the side during baseplate

installation.

5. Remove the three (3) bolts located above the bumper. The two (2) outer bolts require a 12mm

socket. The center bolt will require a 10mm socket to remove.

6. Remove the two (2) 12mm bolts that are located under the bumper. Once the hardware is

removed from both sides, place the bumper upside down on a steady, at working surface.

7. Using a 10Mm socket remove air horn and lay it aside. It will be reinstalled after the baseplate

has been installed.