Owners manual

6. Remove the six pushpins from the lower edge of the fascia and the belly pan. Pull the fascia forward to

remove. Set the pushpins and fascia aside carefully to be reinstalled later.

2012 HONDA PILOT: Remove eleven pushpins from the lower edge of the fascia and the belly pan. Pull the

fascia forward to remove. Set the pushpins and fascia aside carefully to be reinstalled later.

7. Remove the temperature sensor from the top of the bumper. It will be relocated as the bumper will not be

reinstalled.

2008-10 Honda Odyssey

2009-12 Honda Pilot EXL

Installation Instructions

BX2251

8. Remove the bolt from the bottom of the metal bumper with the 12MM socket. Do this to both sides of the

vehicle.

9. Using the 12MM socket, remove two bolts from the top of the metal bumper. Do this to both sides of the

vehicle. Pull the metal bumper forward to remove. The metal bumper will not be reinstalled.



10. Using the 10MM socket, remove one bolt (white arrow) from the top side of the headlight assembly. Also

remove the pushpin (gray arrow). Do this to both sides of the vehicle. Set the bolts and push pins aside to be

reinstalled later.

11. Using the 10MM socket, remove one bolt from the side of the headlight assembly. Do this to both sides of the

vehicle. Set the bolts aside to be reinstalled later.

Page 5 of 10 405-0096 Rev D 10/14/11

10 11