Owners manual

3. Using the 10MM socket, remove the bolt from the corner of the fascia. Do this to both sides of the vehicle.

Set bolt aside to be reinstalled later.

2008-10 Honda Odyssey

2009-12 Honda Pilot EXL

Installation Instructions

BX2251



4. Using the Phillips screwdriver, remove the two Phillips screws from the corner of the fascia just forward of the

front tire, inside the wheel well cover. Do this to both sides of the vehicle (4A and 4B). Set screws aside to be

reinstalled later.

2012 HONDA PILOT: Using the Phillips screwdriver, remove the three Phillips screws from the corner of the

fascia just forward of the front tire, inside the wheel well cover. Do this to both sides of the vehicle (4C and

4D). Set screws aside to be reinstalled later.



5. With a 10MM socket, remove one bolt from just

forward of the front tire. Do this to both sides of the

vehicle. Set bolts aside to be reinstalled later (5A).

2012 HONDA PILOT: With a 10MM socket, remove

two bolts from just forward of each front tire (5B)

and two bolts underneath the fascia toward the

middle of the vehicle (5C).



DS and PS



Page 4 of 10 405-0096 Rev D 10/14/11