Owners manual

2008-10 Honda Accord

Installation Instructions

BX22429

Page 5 of 8 405-0043 Rev. B 7/27/10

7. Remove the headlight by removing the three bolts around it and unplug the electrical connections. Do this on

both sides. Set the bolts and headlights aside to be reinstalled later.

9. Using a 12MM socket remove the four metric bolts

holding the metal bumper and extension. This is

done to both sides. Pull the metal bumper forward

and set carefully aside to be reinstalled later.

8. Behind the bumper, disconnect the temperature

sensor by pulling the cable out before taking the

bumper off.