Owners manual

Page 3 of 8 405-0043 Rev. B 7/27/10
2008-10 Honda Accord
Installation Instructions
BX2249
Attachment Tabs:
Due to the design of the removable tabs, the
RangeFinder II tow bar can not be used. Adapters,
except the BX8833 and BX88151, can not be
used with this baseplate.
Installation Notes:
The radiator cover, fascia, bumper and
extension are removed for the baseplate
installation. Drilling is required. Headlights are
removed and replaced for installation.
Some vehicles fascia’s may need trimming.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufactures’ tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The Bx8848 4-Diode Wiring Kit is
recommended for this vehicle.
2. In the corner of the fascia, remove the Phillips
screw. Do this to both sides of the vehicle. Set
screw aside to be reinstalled later.
2
2
Ô
Ô
1. Remove eight push pins in order to remove the
radiator cover. Do this to both sides of the vehicle.
Set cover and push pins aside to be reinstalled
later.
1
1
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
Installation Instructions:
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.