Owners manual

BX2246
2007-11 Honda CR-V
Installation Instructions
292-2906 Rev. H Page 9 of 10 8/9/11
22
22. Align the fascia to its original position and,
using the hack saw blade or utility knife, trim
fascia contours to allow room for relocated
coolant lines. Do this to both sides of the
vehicle. Remove fascia.

Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.
If the baseplate is in an accident, it must be
replaced. DO NOT use it again! An acci-
dent can cause unseen damage and using it
again could result in more damage or seri-
ous injury. DO NOT use the baseplate if it is
damaged or missing parts.
23. 2010 Model: Trim the two outside bars
completely off so that the baseplate tabs can
come through. Do this on both sides.

23
DEALER or INSTALLER:
Be certain the user receives the
instruction sheets for their products.
Install the tow bar and safety cables
according to the instructions provided in their
packages. When demonstrating this to the
customer, be sure to include all the contents
and packages.
Do NOT substitute other devices if the tow
bar pins and clips are misplaced.
24. Reinstall the fascia.