Owners manual
BX2246
2007-11 Honda CR-V
Installation Instructions
292-2906 Rev. H Page 8 of 10 8/9/11
18. Reinstall washer reservoir, temperature
sensor, air bafe, coolant line clips on
passenger’s, the coolant line clip on the
driver’s side and bolts.
17. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate (see grey arrow). The photo
above shows the recommended installation
of the cables to frame of vehicle (see white
arrow). Additional options may interfere with
suggested mounting; in this case secure
the cables to a solid piece of the frame as
described in the instructions included with the
permanent baseplate safety cables. Be sure
the safety cables do not rub against any hoses
or moving parts. Do this to both sides of the
vehicle.
17
21
21. Attach the breakaway to the bracket with 1/4-
20 x 3/4” bolt and 1/4-20 nut.
19. Measure 4” from the receiver tube to location
position for the breakaway bracket. Drill a
hole into the bottom of the metal bumper with
9/32” drill bit.
19
20. Attach 102-7056 bracket as the breakaway
bracket to the underside of the metal bumper
with a 1/4-20 x 3/4” bolt and 1/4-20 nut.
20