Owners manual

BX2246
2007-11 Honda CR-V
Installation Instructions
292-2906 Rev. H Page 6 of 10 8/9/11
11. Using the 12mm socket, remove two metric
bolts (one from the top and one from the
bottom) of the metal bumper support. Do
this to both sides of the vehicle. Remove the
pins attaching the temperature sensor to the
bottom of the bumper. Pull bumper forward to
remove. Set bolts, bumper, pins and sensor
aside to be reinstalled later.
11 12
12. On the passenger’s side, disconnect and plug
the washer reservoir. Remove two metric bolts
from the front of reservoir using the 10mm
socket. Set bolts aside to be reinstalled later.
13
13. 2010 Model: Remove one metric bolt from
the back side of washer reservoir using the
10mm socket. Pull reservoir down and to the
side to remove. Set bolts and reservoir aside
to be reinstalled later.


13
13. 2007-09 Models: Remove one metric bolt
from the side of washer reservoir using the
10mm socket. Pull reservoir down and to the
side to remove. Set bolts and reservoir aside
to be reinstalled later.



