Owners manual

2006-11 Honda Civic
(Incl. EX, LX, DX)
Installation Instructions
BX2243
16
16
16. Using the 12MM socket, remove the metric bolt
from the horn shield on the radiator support on
the passenger’s side. Hang horn over the lower
radiator support ensuring it is out of the way.
17
17
17. Using the 12MM socket, remove the metric bolt
from the lower part of the horn shield. Set shield
aside. It will not be reinstalled.




18. Underneath the driver’s side, using a 17MM socket,
remove the metric bolt from the lower suspension.
18
18


CAUTION:
Do steps #19-21 to the driver’s side fi rst.
Do NOT remove the lower suspension bolt on the
passenger’s side, until driver’s side bolt is reinstalled.
Doing so could cause the forward drive train to become
unstable and fall out.
Page 7 of 10 292-2797 Rev. H 5/25/11
19. On the driver’s side, place the support plate
against the radiator support and frame. Guide
upward until it surrounds the frame side extension.
Hold the endplate steady and insert the existing
metric bolt, from step 19, underneath the endplate
and up into the bolt hole for the lower suspension,
as indicated by the white arrow in the photo above.
Tighten with the 17MM socket. Do not over tighten
as the endplate may need minor adjustments.
19
19



