Owners manual

Attachment Tabs:
Due to the design of the removable tabs, the
RangeFinder II, Acclaim and Ambassador tow
bars can not be used. Adapters, except the
BX8833 and BX88151, can not be used with this
baseplate.
Instruction Notes:
The front fascia, styrofoam bumper, metal
bumper, horn bracket, air baffl e and
windshield washer reservoir are removed
and reinstalled during baseplate installation.
Drilling is required.
The dimensional variations between otherwise
identical vehicles can be considerable.
Although the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8848, 4 Diode Wiring Kit is
recommended for this vehicle.
Use a 12 Volt D. C. continuity lamp tester to
insure the BX8848 will function properly
.
2006-11 Honda Civic
(Incl. EX, LX, DX)
Installation Instructions
BX2243
1. Remove two push pins from the top of the fascia.
Set push pins aside to be reinstalled later.
1
1




2. To the rear of the driving light, remove a Christmas
tree pushpin. Set pushpin aside to be reinstalled
later. Do this to both sides of the vehicle.
2
2


3. Lift the black plastic cover. Set aside to be
reinstalled later.
Page 3 of 10 292-2797 Rev. H 5/25/11
Installation Instructions:
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.