Owners manual

Page 4 of 7 292-2558 Rev. I 07/11
3. Using a 10MM socket, remove two metric bolts
from the bottom of edge of the fascia, just
forward of the front tires. Set bolts aside to be
reinstalled later. Do this to both sides of the
vehicle. Remove two pushpins from the lower
edge of the fascia. Set push pins aside to be
reinstalled later. Do this to both sides of the
vehicle.
3
4. Using the 8MM socket, remove the metric
bolts on the upper fascia corner. Set bolts
aside to be reinstalled later. Do this to both
sides of the vehicle. Pull the fascia forward
and set carefully aside to be reinstalled later.
4
5. Using the 12MM socket remove two metric
bolts from the top side of the frame and one
metric bolt from the side of frame, see arrows
in photo, both sides. Remove the metric bolt
on the bottom with the 12MM socket, both
sides, and remove metal bumper. Metal
bumper will not be reinstalled.
5
6. Using the 13MM socket, loosen one metric
bolt on the horn bracket and turn the horn out.
Do this to both sides of the vehicle. See the
photo above.
6
2002-04 Honda CR-V
2003-11 Honda Element
Installation Instructions
BX2232





