Owners manual

3. Using the 10MM socket, remove the metric
bolt from the bottom side of the fascia corner.
Set the metric bolt aside to be reinstalled later.
Do this to both sides of the vehicle.
3
3
4. Remove six pushpins from the bottom side
of the fascia. Set the pushpins aside to be
reinstalled later.
4
4
5. Using the 10MM socket, remove fi ve bolts
under and one on the outside of the headlight
assemblies, unplug and set aside to be
reinstalled later. Set metric bolts aside to be
reinstalled later. Do this to both sides of the
vehicle.
5
5
6. 2002 Models: Hold the baseplate in place,
clamp with the vise grips, and center to the
bottom of the metal bumper.
2003-05 Models: Hold the baseplate sides
to align with the front edge of the frame end.
Mark and drill all holes into the frame using the
13/32” drill bit and the 17/32” (upper holes) drill
bit. Do this to both sides of the vehicle.
6
6
2002-05 Honda Accord
(Including LX, EX, DX)
Installation Instructions
BX2229
Ô
Ô
Page 4 of 6 292-6120 Rev. D 12/3/09