Owners manual

Removable Tabs:
Due to the design of the removable tabs,
the RangeFinder II tow bar can not be used.
Adapters, except for the BX8833 and the
BX88151, can not be used with this baseplate.
Instructions:
The front fascia, metal bumper, and head light
assemblies are removed and reinstalled for the
baseplate installation. Drill is required.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
available for this vehicle.
2. Using the 8MM socket, just behind the fascia’s
upper corner, remove one metric bolt. Set the
bolt aside to be reinstalled later. Do this to
both sides of the vehicle.
1. Remove two pushpins from the top side of the
grille. Set the pushpins aside to be reinstalled
later.
1
1
2
2
2002-05 Honda Accord
(Including LX, EX, DX)
Installation Instructions
BX2229
Page 3 of 6 292-6120 Rev. D 12/3/09
The possible location for the
The possible location for the
BX8869 Bulb and Socket Wiring Kit.
BX8869 Bulb and Socket Wiring Kit.