Owners manual

BX2195
2007-11 Ford Ranger XLT 4WD
2011 Ford Ranger Edge 2WD
Installation Instructions
292-2961 Rev. G Page 2 of 6 7/28/11
Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a bolt is lost or
in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade
(In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue
Ox® Dealer or Distributor. Failing to follow and/or altering these installation instructions in either installation or required equipment will
void the manufacturer’s warranty. Towing behind a non-motorized vehicle will void the warranty.
Tools Required
Loctite
®
RED Vise Grips
13MM Socket 15MM Socket
18MM Socket 3/4” Socket
Flat Screwdriver 3/8” Socket
Hammer Drill
17/32” Drill Bit
Parts List
Ref. No. Qty. Part # Description
1 1 61-6406 Weldment, Baseplate, BX2195
2 8 61-3799 Weldment, 1/2-13 Nut Plate with 10” wire
3 8 201-0051 1/2-13 X 1 1/2 Hex Bolt Grd.5, ZP
4 8 203-0012 1/2 Lock Washer, ZP
5 2 201-0553 1/4-20 X 1/2 Hex Wshd., Type F Screw
6 2 201-0192 #10-32 X 1/2 Slot, Rd. Hd. Screw
7 2 203-0054 #10 Lock Washer
8 2 202-0047 #10-32 Hex Nut
9 2 101-5822 Adapter, 4 Way Connector
10 2 62-3468 Attachment Tab Assembly (Rem), SF/SB, 1 Hole
2 290-0437 Cap Plug, Black (Not Shown)
2 229-0359 Quicklink, 3/8”, ZP (Not Shown)
2 226-0046 Baseplate Safety Cable, 36” Class III (Not Shown)