Owners manual

2007-10 Lincoln MKX
Installation Instructions
BX2192
Page 8 of 9 292-2947 Rev. I 10/4/10
19. Using a hack saw blade, trim away plastic
areas located on the back side of the fascia,
just above the fascia opening as indicated
in photos 19A, 19B and 19C. Do this to both
sides of the fascia.
19A. Measure 2 1/2” back and along the baseline
of the plastic and all the way around. Mark and
trim.
19A
19A
18. Using a hack saw blade, trim off tab located
on the back side of the fascia. Do this to both
sides of the vehicle.
Ô
Ô
18
18
19B
19B
19C
19C
19B. Fascia shown after step 18A is completed and the additional bit of plastic towards the webbing is
removed.
19C. Measure another 1/2” outwards, mark and trim.
20. Reinstall washer reservoir and fascia to
original positions.
Be sure that ALL electrical connections
are plugged in properly and functioning
BEFORE installing the fascia.