Owners manual

Important:
Use only genuine factory replacement parts on your baseplate. Do NOT substitute homemade or non-typical parts. If a
bolt is lost or in need of replacement, for your safety and the preservation of your baseplate, be sure to use a replacement
bolt of the same grade (In most cases it will be Grade 5, please reference the parts list above). Replacement parts may be
ordered through your nearest Blue Ox® Dealer or Distributor.
2005-08 Ford Mustang
Installation Instructions
BX2186
Tools Required
Loctite
®
RED
10mm Socket
13mm Socket
9/16” Socket
Phillips Screwdriver
13/32” Carbide Drill Bit
Vise Grips
1 1/4” Hole Saw
Side Cutters
Tape Measure
Parts List
Ref. No. Qty. Part # Description
1 1 61-6296 Weldment, Base Plate, BX2186
2 4 61-5208 3/8-16” Nut Plate with 14” Wire
3 2 106-0368 Pipe, 3/8” Schedule 40, 1/2 Inch
4 4 201-0440 3/8-16 x 1 1/2” Bolt, Grd. 5, ZP
5 2 201-0404 3/8-16 x 1 3/4” Bolt, Grd. 5, ZP
6 6 203-0010 3/8” Lock Washer
7 2 202-0003 3/8-16 Hex Nut, ZP
8 2 201-0553 1/4-20 x 1/2” Hx. Wshd, Type F Screw
9 2 201-0192 #10-32 x 1/2” Slot, Rd. Hd. Screw
10 2 203-0054 #10 Lock Washer
11 2 202-0047 #10-32 Hex Nut
12 2 101-5822 Adapter, 4 Way Connector
13 2 62-3468 Attachment, Assembly, SF/SB (R)
2 226-0046 Baseplate Safety Cable, 36” CL III (Not Shown)
4 229-0359 Quicklink, 3/8, ZP (Not Shown)
2 290-0437 Receiver, Cap Plug, Black (Not Shown)
Page 2 of 7 292-2863 Rev. D 10/8/09