Owners manual
10. On passenger’s side, atten the tabs around
the lower coolant line bracket. Using the 10mm
socket, remove one metric bolt from the bracket.
Set bracket aside to be reinstalled later (a new
bolt is provided for reinstallation). Follow coolant
line up to fender well and release from the upper
bracket. Move coolant line out of the way. Note:
Some models may have a low emission pump on
passengers side frame. Lift from top of the frame
and move out of the way.
10
11. On the drivers side, behind the metal bumper, use
the 8mm socket to remove one metric bolt from the
air bafe. Set bolt aside to be reinstalled later.
11
12. Pull the front tab of the air bafe down and forward
to release.
12
13. Between the back side of the air bafe and the
wheel well, use the 8mm socket to remove two
metric bolts. Set bolts aside to be reinstalled later.
13
Page 6 of 9 292-2864 Rev D 08/18/11
2005-07 Ford Focus (Includes Foglights)
Installation Instructions
BX2184