Owners manual

BX1994
2011-2013 Chrysler Town & Country LMT
2011-2013 Dodge Caravan
(Includes Grand)
Installation Instructions
405-0175 Page 6 of 10 7/28/11
10. On the passenger side, using a 10MM socket, remove the two (2) bolts one on each side of the
washer reservoir. Unplug the electrical plug and take the water lines off the washer reservoir, mark
and plug them. Set washer reservoir and bolts aside to be reinstalled later.
10C

10A


10B
12
12. On the passenger side, cut off the bracket
which held the temperature sensor. The
temperature sensor will be relocated.

11
11. Using a reciprocating saw, cut straight across
right along side the bottom of the plate 3”
and straight down at a 90
o
angle. (Flush with
the lower frame extension and just behind
the plastic.) Do this on both sides.

3”