Owners manual

BX1994
2011-2013 Chrysler Town & Country LMT
2011-2013 Dodge Caravan
(Includes Grand)
Installation Instructions
405-0175 Page 3 of 10 7/28/11
1. Using a 10MM socket remove the bolt
above the headlight. Using a at screwdriver
remove the push pin. Do this to both sides
and set bolts and push pins aside for later
reinstallation.
Vehicle Weight: Due to the design of the
removable tabs, the RangeFinder II tow bar can not
be used. Adapters, except the BX8833 and BX88151,
can not be used with this baseplate.
Installation Notes: The fascia, temperature
sensor, computer and washer reservoir are removed
and reinstalled during installation of the baseplate.
Drilling is required. Trimming is required.
The dimensional variations between otherwise
identical vehicles can be considerable. While the
baseplate was designed for easy installation, it
may be necessary to tailor the baseplate slightly
to compensate for auto manufacturer’s tolerances.
These minor adjustments may include ling a hole
slightly, bending electrical rods or bending end plates.
The BX8848, 4 Diode wiring kit is recommended for
this vehicle.
Installation Instructions


1
2. Using a Phillips screwdriver, remove two
(2) screws just forward of the front tire on
the wheel well. Do this to both sides of the
vehicle. Set the screws aside to be reinstalled
later.


2
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.