Owners manual

BX1987
2008-13 Smart Car
(with fog lights)
Installation Instructions
405-0050 Rev. E Page 4 of 13 4/9/12
3. Remove the push pin below the head light. Do
this on both sides. Set the push pins aside to
be reinstalled later.
4. Using the 25 Torx, remove the bolt above the
headlight. Do this to both sides of the vehicle.
Set bolts aside to be reinstalled later.


5. Open the door, inside next to the antenna,
remove the bolt with the 30 Torx. Do this on
both sides. Set the bolt aside to be reinstalled
later.
6. Lower on the inside of the door, remove the
push pin. Do this on both sides. Set the push
pin aside to be reinstalled later.

