Owners manual

BX1846
2012 Nissan Versa S/SV/SL Sedan
Installation Instructions
405-0255 Page 6 of 7 2/15/12
8. Slide the baseplate downward at a slight angle and then up so the baseplate frame runs parallel
with the vehicle’s main frame. The top of the baseplate endplate should be ush with the top of
frame. The back edge of the baseplate endplate should be aligned with the front edge of the main
frame.
Start two (2) of the 3/8”-16 x 1-1/4” hex head bolts and 3/8” nut diagonally from each other. Insert
the remaining two (2) bolts and nuts. Once all the fasteners have been started tighten securely.
Do this on BOTH sides of the vehicle.
9. Using the existing stud, attach the breakaway bracket and securely fasten with the 8MM x 1.25
nut that has been provided.
10. Reconnect the windshield wiper uid
reservoir using the existing fasteners except
11. Attach the permanent baseplate safety
cables to the provided convenience link on