Owners manual

BX1846
2012 Nissan Versa S/SV/SL Sedan
Installation Instructions
405-0255 Page 5 of 7 2/15/12
6. With a 10MM socket remove the three (3) bolts that hold the windshield wiper uid reservoir in
place. On the front of the reservoir there is one (1) bolt at the bottom and one (1) towards the top.
On the backside of the reservoir is the 3rd bolt. It may be necessary to push back on the wheel
well liner to access this bolt.
5. With a Phillips screwdriver, remove the screw on top of the windshield wiper uid reservoir. Next,
disconnect the tubes and plug to prevent leakage. Set the reservoir off to the side temporarily.
7. Release the push pin that is connected to the bumper. Using a utility knife cut straight across to
remove the plastic guard. Do this on BOTH sides of the vehicle.