Owners manual

BX1846
2012 Nissan Versa S/SV/SL Sedan
Installation Instructions
405-0255 Page 4 of 7 2/15/12
1. Remove the ve (5) push pins that are located in the front area, underneath the hood. There are
two (2) push pins located on the outer edges on BOTH the driver side and the passenger side.
There is also one (1) located in the center.
2. Using a 20 torx remove the two (2) screws underneath the vehicle on the outside edge. Towards
the center there are three (3) push pins that need to be removed. Do this on BOTH sides of the
vehicle.
3. Remove the two (2) 10MM bolts that are
located in the center.
4. Pull the splash guard back slightly. At the top
portion of the wheel well area is a 10MM bolt.
Using a 10MM socket remove this bolt. Do
this on BOTH sides of the vehicle.